Belts Material Benefits
 The Belts fabricated by ATI "Al MAZZAWI" feature advanced materials, made of PTFE (Poly Tetra Fluoro Ethylene) designed to survive aggressive industrial conditions:


Cryogenic to high temperature
Belts operate continuously in the range of -150 to 260 C, without loss of any of their operational properties.

Sticky surface
Thanks to the chemical inertness of the PTFE the belt surface are non-stick, along with a very low coefficient of friction.

Heat loss
Given the minimal heat sink properties of the material, the belts heat-up faster and use less energy to maintain operating temperature, no matter how big the belts are.

Chemical attack
Again thanks to PTFE coating the belts are not affected by most chemicals and solvents.

IR, UV or RF
Glass fabric belts is compatible with most heating systems including IR, UF, RF media.

Dirt build up
The belt surface is very easy to clean with minimal effort.

Moisture
The Kevlar® belts are recommended for use in moist and steamy environments.

Static charge
Whenever static charge is a problem, we can provide conductive anti-static frades.

Flex-Fatigue
Nomex® fibers prove superior flex-fatigue endurance compared to any other fiber designed for high temperature belts.

Temperature distribution
The open mesh belts allow for maximum air circulation, consequently, a higher operating speed matched with less power consumption.


Belts Mesh Fabric
Mesh Belts are the best for industrial dryers heated by hot air circulation for the following reasons:



The openings in the fabric allow for good air circulation, enhancing temperature distribution. As these belts are usually of large dimensions up to 3m wide, 20 to 30m long, The materials offer weight much lighter compared to other metallic options, allowing big saving on the driving force of the machine and much reduced heat loss. Consequently lower operating cost.

All belts are made in our factory with the best carefully chosen joint and edge reinforcement type for each and every machine model. Our engineers are at your disposal for all support regarding your dryer belts.




Belts Closed Fabric
Whatever your machine type we have the belt designed for it. All dimensions are custom made for your machine in our factory. The belt material proved outstanding characteristics from which you can benefit to solve various industrial process problems.